Issue: Layer Color Attributes assigned in PowerCADD 8 (PCD8) don't stick when opened in ACAD.

Affects:

• PowerCADD 8.0.0, ACAD Translator External
• Priority: Medium
• This issue has been reported to Engineered Software

Description

When writing a dwgi filei from PCD8, Layer Color Attribute settings assigned in PCD8 are not assigned by default when the file is opened in ACAD (the objects do retain the assigned layer color). In PowerCADD 7 (PCD7), Layer Color Attribute settings were/are correctly assigned when the dwg file is opened in ACAD.

To see the incorrect condition, do this:

1. Assign a Layer Color Attribute in PCD8. An example is pictured below.



2. Write (save) as dwg.
3. Open the dwg from (2) in ACAD.
4. Results: The objects retain their correct color attributes but the layer in ACAD does not have the correct layer color attribute assigned. The screen shot below illustrates the results:

To see the correct condition, do this:

1. Assign a Layer Color Attribute in PCD7 (or open the same file created in PCD8).
2. Write (save) as dwg.
3. Open the dwg from (2) in ACAD.
4. Results: The objects retain their correct color attributes and the layer in ACAD has the correct layer color attribute assigned. The screen shot below illustrates the results:

Work Around

There is no work around directly in PowerCADD 8. If the PCD8 file doesn't contain Advanced Text blocks then the file can be opened in PowerCADD v7 and the dwg file can be saved from there. The alternative is to re-assign the correct layer color attribute setting in ACAD.

We hope that helps
caddpower.com

------
If you found this article or the website in general to be helpful, educational or a time and money saver you can show your support. Thank you ~ Brian (huc) Huculak, Co-founder and Managing Editor, caddpower.com - powercadduser.com